Space Heaters
The HeatStar 30,000 BTU Vent-Free Radiant Heater takes a different route, warming objects and people directly the way sunlight does, so a workbench or workstation feels warm within seconds of startup. Mounting hardware for floor-standing or wall mounting ships in the box. Hang the bracket about 36 inches off the floor, and the control knob stays within easy reach. For floor mounting, the base feet set it down with 3 inches of clearance underneath, and leaving 36 inches above and 10 inches at each side keeps furniture and fabric out of the heat path. Key Features and Benefits of the HeatStar 30,000 BTU Vent-Free Radiant Heater High Output: Up to 30,000 BTUs of radiant heat covers roughly 750 square feet, enough supplemental warmth for a two-car garage or an unfinished basement. Infrared Burner Tiles: Multiple burner tiles heat objects and people directly, so you feel warm in seconds instead of waiting for the air to catch up. High Efficiency: Vent-free combustion keeps 99 percent of all the fuel energy in your room rather than sending it up a flue. Thermostatic Control Knob: The knob gives you five settings and cycles the burner on and off to hold the temperature you set. Push-Button Ignition: Electronic ignition lights the burner at the press of a button, and the AA batteries it needs are included. Oxygen Shut-Off Sensor: A built-in low oxygen sensor cuts the gas supply if oxygen in the room drops to an unsafe level. Blower Fan: The fan runs from a standard 110-120 volt outlet and helps move warmth through the room. During an outage, the heater still produces heat. White Compact Housing: The white housing measures 24 x 28 x 8 inches (H x W x D) and weighs 30 pounds for close-to-wall placement. Safety Certified: Built to ANSI and CSA standards, the heater meets recognized safety requirements for vent-free gas heating. Propane or Natural Gas: Choose Your Fuel Supply The fuel-supply choice is propane or natural gas, so select the option that matches your building's gas