Miscellaneous
Most duct cleaning rigs ask you to park a large machine in the driveway and run a hose through the house. The Air-Care Zephyr Portable Air Duct and Dryer Vent Cleaning Machine takes the opposite approach with a 61-pound cabinet one technician can carry to the ductwork, whether that means a finished basement or a second-floor utility closet. It is also a contact cleaning system rather than a negative air unit. Instead of depending on airflow alone to draw debris out of a run, the Zephyr uses a flexible drill-powered brush and rotating cable to agitate packed dust and lint off duct walls while the vacuum captures it. That direct mechanical action is what separates a surface pass from a genuinely clean duct. Key Features and Benefits of the Air-Care Zephyr Portable Air Duct and Dryer Vent Cleaning Machine Strong Suction: Max vacuum airflow up to 200 CFM pulls loosened dust and lint out of residential duct runs as you work. 4-Stage Filtration: Four-stage HEPA filtration captures 99.97 percent of particles down to 0.3 microns, so the air returning to the room stays clean. Contact Cleaning: An 18-inch flexible duct brush on a rotating cable, powered by your power drill (not included), agitates compacted debris loose instead of relying on suction alone. Hose Reach: The 25-foot vacuum hose reaches distant registers and dryer terminations without repositioning the machine mid-job. Mobile Design: At 61 pounds, the aluminum frame with ABS panels loads into a van and moves down basement stairs with one technician. Included Adapters: An adapter for either a 3-inch or 2-inch hose comes with the machine for dryer vents and small-diameter runs. Snap-Latch Access: A hinged top with snap latches opens straight to the four-stage filter stack for checks between jobs. Standard Power: Operation on standard 120-volt power means the Zephyr runs on ordinary household circuits at residential job sites. However, this model does not include a power cord , and it must be purchased separately. F