Miscellaneous
A duct cleaning job is only as good as the suction behind it, and the Air-Care TurboMax II 2 HP Negative Air Duct Cleaning Machine is designed to supply high-quality suction. Connected to a home duct system, it puts the whole run under negative pressure so loosened debris travels into the machine instead of scattering through the rooms you just cleaned. The TurboMax II adapts to the layouts technicians actually meet in the field. On basement and crawlspace furnaces, it ties into an access hole in the supply side main trunk line. On up-flow systems tucked into a garage, interior closet, or roof space, it connects at a large ceiling or wall supply opening so gravity works with the airflow. Key Features and Benefits of the Air-Care TurboMax II 2 HP Negative Air Duct Cleaning Machine Single-Speed Motor: A 2 horsepower single-phase motor drives the airflow, with a soft-start feature that slowly climbs to full speed in seconds. High-Speed Airflow: The airflow suction from this machine reaches 2,700 cubic feet per minute at 5.0 inches w.c. static pressure, enough pull to clear full residential duct runs. HEPA Filtration: Three-stage HEPA filtration traps pollen, dust, and mold spores inside the unit so captured debris never re-enters the living space. Maneuverable Design: At 125 pounds and featuring two non-skid and two swivel caster wheels, one or two technicians can move the TurboMax II between floors and up stairs without issues. Compact Footprint: Measuring 22.5 x 31.5 x 55.5 (W x H x D) inches, it can be stored and used in tight mechanical rooms and hallways. Standard Voltage: Runs on 110-120 volt power, so it runs on the standard power that most homes use. Toggle Control: A single toggle switch handles start and stop, keeping operation simple for crews rotating through several jobs a day. Is 2,700 CFM Enough for the Systems You Clean? Rated at 2,700 CFM against 5 inches w.c. static pressure, the TurboMax II is sized for single-family homes and small commercial spaces